HP OfficeJet 4630 Setup: A Step-by-Step Guide

Your HP OfficeJet 4630 et up printer is a straightforward process that allows you to start printing, scanning, and copying quickly. Follow this step-by-step guide to ensure a smooth installation.

Step 1: Unboxing and Initial Setup

Begin by unboxing your HP OfficeJet 4630. Carefully remove all packaging materials, including tapes and protective sheets. Place the printer on a flat, stable surface near a power outlet. Ensure there’s enough space around the printer for ventilation.

Step 2: Power Connection

Connect the power cord to the back of the printer and plug it into an electrical outlet. Press the power button to turn on the printer. You will see a control panel light up, indicating that the printer is ready for setup.

Step 3: Install Ink Cartridges

Open the ink cartridge access door, which will lift automatically. Wait until the carriage is silent and move it to the left if necessary. Remove the new ink cartridges from their packaging, and gently pull the protective tape off. Insert the cartridges into their corresponding color-coded slots until they click into place. Close the access door when finished.

Step 4: Load Paper

Pull out the paper tray and adjust the paper guides. Load a stack of plain paper into the tray and adjust the guides to fit snugly against the paper. Reinsert the tray into the printer.

Step 5: Connect to Wi-Fi

On the printer’s control panel, navigate to the wireless settings. Select the Wi-Fi network you wish to connect to and enter the password when prompted. Once connected, your printer will print a network configuration page.

Step 6: Install Printer Software

To complete the setup, install the printer software on your computer. You can download the latest drivers from the HP website. Follow the on-screen instructions to add your printer and complete the setup.

By following these steps, your HP OfficeJet 4630 Set up will be ready for use, allowing you to enjoy its multifunction capabilities!