Solve Low Water Pressure Issues with These Plumbing Fixes

Low water pressure tends to be one nagging problem many owners need to put up with. Whether it’s in the bath, kitchen, or washroom, the disorderly flow of water makes every chore seem like a nuisance. If you are troubled by low water pressure, be at ease, for there are many easy remedies you can try to restore standard water flow in your residence.

In this blog, we will walk you through some of the most common causes of low water pressure and easy-to-follow best plumbing service in phoenix repairs that can resolve the issue with no need to call a plumber. Let’s get started!

Check the Water Pressure Regulator

The first thing to do to resolve low water stress is test the pressure regulator of the water. Most homes have something called a strain regulator that governs the drift of the water from the primary supply line. If this regulator is malfunctioning, it is able to purpose a drop in water stress.

Fix:

Locating the regulator usually is near where the main water line feeds into your residence, and also might have a screw or dial that one can use to adjust the pressure. If the regulator is old or has been damaged, it will need replacement. For most, if not all, normal water pressure can be resolved by adjusting the regulators.

Clean or Replace Faucet Aerators

Over a while, mineral deposits, dirt, and debris build up inside the faucet aerators. An aerator is a small screen attached to the end of taps, which allows regulation of water flow. When these aerators become clogged, the water begins to flow more slowly, leading to low water pressure at the tap.

Fix:

To clean the aerator, simply unscrew it from the faucet and soak it in a solution of equal parts vinegar and water for about 30 minutes. Remove it from the soaking solution and use a small brush-such as an antique toothbrush-to sweep away the remaining buildup. If the aerator is just too broken or clogged, don’t forget changing it with a brand new one.

Check for Clogged Pipes

To clean the aerator, simply unscrew it from the faucet and soak it in a solution of equal parts vinegar and water for about 30 minutes. Remove it from the soaking solution and use a small brush-such as an antique toothbrush-to sweep away the remaining buildup. If the aerator is just too broken or clogged, don’t forget changing it with a brand new one.

Fix:

If you happen to notice your pipes are blocked, you may need to have a professional plumber execute a pipe check. Other times, a plumber may even resort to using a drain cleaning solution or even a high-pressure water jet in order to remove the buildup. On shorter pieces of piping, once in a while an ordinary plumbing snake may work.

Inspect the Pressure Balance Valve

If you only have low water pressure in the shower or tub, then the pressure balance valve can be the issue, too. This valve controls the mix of warm and bloodless water in your bathe. If it’s malfunctioning or is clogged, then it may restrict the flow of water, hence low stress.

Fix:

To explain this, you’d want to clean or replace the pressure stability valve. A little challenging for novices, and if you’re not used to emergency plumbing service in phoenix  maintenance, this may be a good time to call in a pro. A plumber will have a look at the valve, clean the sediment that might build up on it and replace it if it needs to be.

Check for Leaks

To explain this, you’d want to clean or replace the pressure stability valve. A little challenging for novices, and if you’re not used to plumbing maintenance, this may be a good time to call in a pro. A plumber will have a look at the valve, clean the sediment that might build up on it and replace it if it needs to be.

Fix:

To find the leak, shut off all water consumers, go and take the reading at your water meter. In about an hour or so, go back and check the meter. A different reading will suggest there is a leakage somewhere in your plumbing network. If you can’t find a leak your self, it would be best to call a plumber who can run a leak detection test and do the needed repair.

Look for Blockages within the Main Supply Line

House-wide low water pressure may be caused by a blockage in the main feed line. Sometimes tree roots or dirt and debris find their way into underground pipes and cause a partial blockage to restrict the flow of water.

Fix:

If you saw an obstruction in the most critical supply line, you would more than likely call in a professional plumber. They could utilize special equipment, including a video camera to visually inspect the inside of your piping system and locate what is obstructing the pipe. In severe cases, the plumber might have to replace or upgrade a section of the supply line in order to reinstate proper water pressure.

Install a Water Pressure Booster

If the case of low water pressure on your block is permanent, then this may be because of a low-pressure water supply coming out from your local utility. In such cases, a water booster pump will increase water pressure throughout your property.

Fix:

A water pressure booster pump is installed on your main water line and works to increase the water pressure coming into your home. While it’s an initial investment, it’s really a good solution for the long term in places that have extremely low water pressure. Have a plumber assist you in selecting the appropriate booster for your needs and in its effective installation.

Check the Water Heater

This could also be an issue with your water heater if you have low water pressure most easily with hot water. When there is a buildup of sediment within the tank, it can eventually constrict the flow of water and the overall water pressure inside, especially in older units.

Fix:

To renew this, you’ll want to flush the water heater to take away the sediment build up. This is a fairly easy task that you may do your self, or you may hire a plumber to do it for you. Regular maintenance along with flushing the tank once a year can prevent you sediment build up and help maintain ultimate water pressure.

Conclusion

Poor water pressure does not have to be a chronic problem. With a little time and some elbow grease, you should generally be able to locate the source and take action to restore the normal flow of water. Since tap aerators and pressure regulators are the easier issues to investigate, start with these before proceeding to possible clogged pipes or leaks. If at any time you feel uncertain about a repair, or if the problem seems far more complicated, do not hesitate to call a professional plumber. They can help you diagnose the problem and make your plumbing function well again.