What Are the Common Causes of Banding Issues in Printing?

Wide-format printing is never easy, as you are prone to encounter multiple issues as you go down the road. Printing large formats for custom banners often pushes you to the room of problems, and dealing with them tests your skills and patience. These problems become more prevalent when you start the process with the least expert mind. Banding issue is probably the most common one on the list, and dealing with it can be tricky. However, before you find the solution, it would be best to know why! This post aims to explain the common causes of banding issues in printing. Keep scrolling to know more!

Common causes of banding issues:

Banding issues in printing are common, and being a newbie, you will make a few mistakes to see the banding problems. However, staying on the safer side and knowing the root causes of banding issues can help your cause. In the case of large-format printing, it would be best to monitor the banding issue constantly and ensure that the end product is free of any banding hazards. Here is a list of common causes you must dig deeper into to avoid banding problems.

1. Clogged Nozzles:

A clogged nozzle could be the leading cause of banding hazards in printing, and you should pay attention to fixing it. Start by getting rid of the obvious source of banding problems. A nozzle check or nozzle test from your printer panel can establish whether you are missing nozzles. The most likely symptom of printhead misalignment is banding. Nozzles not plugged in will produce a line that is either white or the wrong color.

Nozzle tests are to be carried out every day or soon after a prolonged break. Regular checks of the head alignment are also necessary. Test prints are included in every printer to ensure the nozzle and head are properly positioned.

2. Media Skewing:

Media skewing occurs due to various reasons, and it can lead to banding in wide-format printing. A media roll may skew if not loaded evenly across its width. If the media is not moving evenly and equally through the pinch rollers, it will often show a hairline underlap on one side and overlap on the other. It frequently results from large format printers’ media roll being loaded incorrectly.

One way to ensure correct loading is to back-roll the media back to its starting place before closing the pinch rollers after pulling it almost to the printer’s bottom. It makes it possible for the printer’s media to be correctly placed. Do you want to ensure flawless printing at your organization? It would be best to rent an MFP from printer rental Dubai companies and enjoy the printing jobs!

Read also: Print Masters: A Fun Guide to Printers for Kids 

3. Print heads are misaligned:

Misalignment of print heads might go unnoticed, but they can create serious issues during printing. Banding could be the most irritating one of its products, and you must be smart enough to bridge the problem and the root cause. The printer’s head not being properly oriented or the printer being physically relocated to a different position are the two most frequent causes of banding. Furthermore, imagine that you used the software to align the head rather than the printer’s front.

Banding might still be a problem in that situation because the software alignment is not as thorough as the printers. Misaligned head banding typically manifests as darker, off-color horizontal lines that run through the print. Getting rid of these lines require you to align the print head and get things straight!

4. Paper thickness configuration:

Banding can also happen if an extremely thick or thin paper is used without changing the configuration mode. It usually happens in large-format printing; you should not look elsewhere if the paper thickness has been changed without any prior information.

Banding from this cause can lead to darker, off-color horizontal lines running through the print. The easiest way to eliminate this problem is to adjust the paper thickness or the configuration in your printer.

Read also: Diy Custom Parchment Paper For Special Occasions

5. Media adjustment:

Media adjustment could be another reason for banding; you may find tiny hairline gaps on the print. These gaps indicate that the media is advancing or moving too far between passes. You can also find dark hairline gaps on the print, bleeding into one another. They suggest that the media is not processing or moving fast enough.

Media adjustment is easier when you have a modern-day printer in your office. It takes less effort to mitigate such an issue, so why not rent a multifunctional printer in Dubai from reliable printer rental companies today?

Enhance your paperwork with modern printers!

Modern-day printers can do much more than you think, and your paperwork can be greatly enhanced. With fewer printing problems and better quality, these printers can add considerable value to your business. Hire an advanced printer from printer rental companies today and enhance your paperwork!